Zeus
Zeus
Zeus is a 3 controlled axes work centre with the optional of fourth and fifth axes, ideal for profiling, milling, drilling, typing, sculpturing, and turning. This model is available in two versions: ‘’Standard’’ and ‘’PLUS’’ (with a bridge passing of mm. 735, allowing to work massive blocks).
Axes are moved by Brushless motors, ball screws and prismatic ball guides guarantee the precision in moving.
The machine is stainless steel lined throughout in order to ensure maximum structure life.
The working table, made up of ground aluminium, is available either in the traditional staved version, in order to simplify the clamping of the pieces directly onto the plane, or in the “flat” version, in order to quicken the placement of the “double vacuum” suction cups. The tool store is placed on the back side, in order to make maximum use of the working area. The 12,5 HP ISO 40 electro-spindle guarantees the maximum efficiency even in difficult working conditions.
 
Typologies of working
Caratteri
Incisioni
Sculture
cornici
Intarsi
Lettering
Engraving
Sculpturing
Frames
Inlaying works
fotograffiti
colonne
Capietelli
Statue
Top
Pictures’ scratching
Columns
Capitals
Statues
Tops
Piani cucina
Portali
Vasche da bagno
Rivestimenti
Caminetti
Drain boards
Portals
Bathtubs
Decorative pieces
Fireplaces
 
Technical features
(1) Zeus | (2) Zeus Plus
Working area (mm) x 3.370 - y 1.910 - z 420 (1)
  x 3.370 - y 1.910 - z 485 (2)
Overall dimensions (mm) 4.600 x 3.300 x 2.500 (1)
  4.600 x 3.300 x 2.700 (2)
Consolle 600 x 600 mm
Power supply 380 Volt + N + GND
Power 16 Kw
Compressed air 8 BAR/min
Cone type
ISO 40
Spindle rotation speed 0-9000 RPM
Net weight 3.900 Kg (1) | 4.200 Kg (2)
Max. working speed 30-50 m/min
Bridge passing 535 mm (1) | 735 mm (2)
Distance between spindle and working plane 455 mm(1) | 655 mm (2)
Tool changer Automatic
Water consumption 40 lt/min.
 
Accessories
• Digitizer for the acquisition of 3D images
• Laser for the acquisition of 3D images
• Numeric Control Lathe
• “Photograb” device
• Fourth axis for a continuous rotation of 360 degrees
• Option for straight cutting with disk and for columns’ grinding
• Option for frontal sculptures
• Option for cutting with convex disk (shaped cutting)
• Template Reader
• Mechanical support for the realization of inclined drainers
• “Y” Axis Extra – Travel
• Surface copy device to execute lettering works on the slabs with not uniform thickness and tool calibrate device
Download
Download
Download
Download
     
Download
Download
Download
Download